ADVANCED RECYCLING EQUIPMENT |
|
Item: Providing Warm Air Plant Heat for Manufacturing Facility (A) |
|
||
|
||
|
LOCATION: Wisconsin
OUTPUT RATING: 1.5MM BTU
APPLICATION:
This CHALLENGER® CCU402-A "Warm Air" Unit provides warm air heat to manufacturing facility.
The unit is equipped with Standard Controls and Auto De-Ash.
The Standard Control System is complete with an LCD Display that shows the status of the combustion system. Changes to the unit can be easily made manually simply by touching the keypad. The system will also operate at one of four predetermined firing rates (Pilot, Low, Medium or High). The firing rate is determined by constantly monitoring the difference between the current and target temperatures. The control system determines the required firing rate and sets the air flow and fuel feed rates to accommodate the load. A Pager/Remote Access System can be included in this control package. The fuel feed system is complete with a variable frequency drive for an accurate feed rate to ensure complete combustion and a consistent output temperature.
The Auto De-Ash System eliminates downtime and reduces labor costs by removing ash from the system automatically. The Auto De-Ash System is also much safer.
The combustion unit itself, like all CHALLENGER® Combustion Units is equipped with high temperature cast refractory ceramic lining for longer life. This cast refractory/ceramic lining was designed to be completely modular, which makes for easy repair and replacement.
FUEL SOURCE:
This CHALLENGER® Thermal Combustion System burns both green hard and soft wood sawdust, with moisture content up to 50%, from the customer's current waste stream.
SAVINGS:
This pallet manufacturer is able to eliminate a waste disposal bill and costly heating bills by installing this CHALLENGER® Thermal Combustion System. The system also provides them an alternative fuel source that would otherwise be waste.
|
||