ADVANCED RECYCLING EQUIPMENT |
|
Item: Providing Plant Heat, Steam for Dry Kilns, and Thermal Energy for Glue-Drying Operation |
|
||
|
||
|
LOCATION: Japan
OUTPUT RATING: 5MM BTU
APPLICATION:
This CHALLENGER® CCUE408-S "Steam" Thermal Combustion System provides thermal recovery for plant heat, steam for dry kiln operations, and thermal energy for glue-drying operations.
The unit is equipped with an Extended Combustion Zone, PCC Controls and Auto DeAsh. Also included in this system are a Steam Boiler, Gas/Oil Backup Burner, 3 Cubic Yard Mini Storage Bin and Condenser Package.
The Extended Combustion Zone provides additional dwell time for the combustion of any unwanted particulates and emissions before they are able to exit the system, making the process much cleaner, reducing maintenance time and costs.
With PCC Controls, the system will automatically stay within 3 to 5 degrees of the customer's desired set point. Fuel feed motors, combustion fans and induced draft fan all run on variable frequency drives to ensure the proper ratio of combustion air to fuel. The unit will adjust itself automatically according to its load demand.
The Auto De-Ash System eliminates downtime and reduces labor costs by removing ash from the system automatically. The Auto De-Ash System also provides for much safer working conditions.
The combustion unit itself, like all CHALLENGER® Combustion Units is equipped with high temperature cast refractory ceramic lining for longer life. This cast refractory/ceramic lining was designed to be completely modular, which makes for easy repair and replacement.
FUEL SOURCE:
This CHALLENGER® Thermal Combustion System burns a blend of cedar shavings and sawdust from the customer's daily manufacturing operations.
SAVINGS:
The installation of this CHALLENGER® Thermal Combustion System has allowed the customer to use their waste product as a fuel source, virtually eliminating one of their most substantial operating costs.
|
||