ADVANCED RECYCLING EQUIPMENT |
|
Item: Providing Hot Water Plant Heating and Cooling |
|
||
|
||
|
LOCATION: Kansas
OUTPUT RATING: 8MM BTU
APPLICATION:
This CHALLENGER® CCUE408-W "Hot Water" Thermal Combustion Unit provides hot water plant heat and cooling.
The system is equipped with PCC Controls, Extended Combustion Zone and Auto De-Ash. Also included in the system is a Hot Water Heat Exchanger and Cyclone Collector.
With PCC Controls, the system will automatically stay within 3 to 5 PSI of the customer's desired set point. Fuel feed motors, combustion fans and induced draft fan all run on variable frequency drives to ensure the proper ratio of combustion air to fuel. The unit will adjust itself automatically according to its load demand.
The Extended Combustion Zone provides increases dwell time to 1.5 seconds for the combustion of any unwanted particulates and emissions before they are able to exit the system, making the process much cleaner, which reduces maintenance time and costs.
CHALLENGER®'s advanced Auto De-Ash System eliminates downtime and labor costs by removing ash from the system automatically. It's hands-free operation also makes it much safer.
The combustion unit itself, like all CHALLENGER® Combustion Units is equipped with high temperature cast refractory ceramic lining for longer life. This cast refractory/ceramic lining was designed to be completely modular, which makes for easy repair and replacement.
FUEL SOURCE:
This CHALLENGER® Thermal Combustion System burns dry hardwood sawdust and particle board.
SAVINGS:
The installation of this CHALLENGER® Thermal Combustion System has allowed the customer to use their waste product as a fuel source, virtually eliminating one of their most substantial operating and waste disposal costs.
|
||